Swann SW111-WIP Manual de usuario

IP-3G ConnectCam 1000™ Wireless Network Camera SW111-WIP SW211-WIP USER MANUAL

 CAMERA Panel - TRIGGER OUT: Click to turn on the trigger out connector of the camera. This button is available only when the connected camera su

 SYSTEM Panel This panel displays the current date and time.  PAN-TILT CONTROL Panel (optional) When you connect a pan/tilt camera, the system

 Video View Window and Camera List Video View WindowCamera List- Video View Window: This window displays the video view of the selected camera, wh

To add a camera 1. Click SETTING in the CONTROLS panel to display the Setting screen. 2. Click Add New Camera. - 12 -

3. In the pop-up Add New Camera dialog window, you can: z Select the Search tab if you are not sure of the camera’s IP address. Click Search camera t

4. Enter the User name and Password for the camera, and then click OK. The connected camera will be displayed in the Camera List. 5. Click SETTING t

To remove a camera 1. Click SETTING in the CONTROLS panel to display the Setting screen. 2. Select a camera from the list and click Delete Camera.

To record video Ultra View provides three methods to record video clips; one is to click the RECORD/ALL RECORD button to record manually; the second i

z Schedule recording This recording method will work after you have completed the required settings in Schedule Recording Configuration. The recordin

- Days: First, select the camera from the pull-down list and select Days tab. Then, select the weekday from the day buttons and then set the time per

- 1 - Contents Introduction...2 Installation ...

z Reserved HDD space for each camera: This option allows you to set to reserve the storage space on the hard disk drive for the recording of each cam

To playback the recorded video The recorded video clips are saved ro your computer, and can be played using the media player on the computer, such as

To set up motion detection options When the motion detection function of the selected camera is enabled, you can set the Motion Options by selecting A

- 22 -- Mail Server: Enter the mail server address. For example, mymail.com. - Mail From: Enter an email address of the user who will send the emai

Information Click SETTING > About to display the information of the software application. - 23 -

- 2 -INTRODUCTION This Software User Guide provides detailed instructions on operating Ultra View, a customized software application with a user-frie

INSTALLATION Firstly, insert the Installation CD-ROM into your CD drive to initiate the Auto-Run program. The Auto-Run screen provides the following o

2. When the welcome screen appears, click Next. 3. Click Browse to select the destination location to install the software or click Next to use the

4. Click Next again to confirm installation. The setup wizard starts to install the software and the progress bar indicates the installation is proce

USING ULTRA VIEW To launch the program This section describes the user interface and operating instructions of Ultra View. To launch the program, clic

Item features The following describes the function of each item on the main screen:  CONTROLS Panel - SETTING: Click to enter the Setting screen

 VIEW SELECTION Panel - View mode buttons: Ultra View provides multiple view modes, including 1/4/9/16 windows and Full screen mode. - SCAN: When